New HP 633537-001 SMART ARRAY P222 SAS RAID Controller 2GB
It supports multiple RAID levels including RAID 0, 1, 5, 6, 10, 50, and 60, allowing optimized data protection and performance for various storage workloads. · SMART ARRAY. We believe ourWide Product Range will be your selection.
HP 726815-002 Cache Module 4GB FWBC for Smart Array P440 P840 w/Cable 759678-001
HP 85133D (85133-60001) Semi-Rigid Cable Set, 2.4 mm (M and F), 21 inch
The Agilent 85133D is a 53 cm (21 in) long. 1 of the Agilent 85133D is less than 0.06 dB and phase is 0.16 f, where f is frequency in GHz. 2 to 2.4 mm male connector. Insertion loss is 0.55 sqrt (f) + 0.2, where f is frequency in GHz, for the test port connector and 3.7 dB at maximum frequency for the device connector.
HP E3611A DC Power Supply 0-20V, 0-1.5A or 0-35V, 0-0.85A
NOTE: The photographs are representative of the various units available. Load & Line Regulation. Power (max): 30 W. Range 2: 0 to 35 V, 0 to 0.85 A. Peak-to-Peak: 2 mV.
HP 6284A 20V 3A 60W Power Supply Option 40 FULLY TESTED! fully protected output
TESTED UNDER FULL LOAD! NO CORROSION!
HP 6284A DC Power Supply 0-20V 0-3A Linear Lab Bench Power Supply Agilent
Linear Design: Provides much cleaner power (lower ripple/noise) than modern switching supplies. Key Features Rugged Build: Made in the USA with a heavy-duty chassis and heat sink. Compatibility & Use.
HP 6236B Triple Output DC Power Supply Tracking 6V 20V Linear Lab PSU
Condition: F4-C4. Used, Good Working. (Cables, User manual not included).
⚡ Hewlett Packard 6205B Dual Output Linear DC Power Supply 40V .3A / 20V .6A
Overload Protection: fixed current limit (limits to approx. 100mA above max. ).
HP 6632B System DC Power Supply 0-20V/0-5A 100W
Error 11 on the 6632B = E11 self-test failure: 12-bit DAC test failed.
HP 6624A System DC Power Supply 4x Outputs 0-7V 5A 20V 2A 50V 0.8A – Tested
Programming accuracy at 25°C ±5°C (2 outputs each). Ripple & noise (20 Hz to 20 MHz) 2 outputs each.