Heavy Duty Carlson Surveyor + Data-logger Demo Surv CE software
You are viewing a Standard model refurbished Carlson Surveyor + handheld data logger with Wifi, Bluetooth, with SurvCE demo, or transfer your SurvCE from your damaged Data collector, (unlicenced demo of version 6 installed, we can supply with demo version 2,3,4,5,or 6 as needed by your device). Connect to your Topcon, Leica, Sokkia, Spectra, Bosch, Nikon, Geomax Robot, GPS, Level, etc. Expedited Fast 1-3 day shipping from Stock in USA. With Warranty. Registered Carlson dealer. Unit can be used for Robotics if longrange Parani bluetooth dongle is added. We can supply this too. Comes with Hard Padded Carrycase12 Volt Charger2 Soft tip Stylus1 Tripod hook Micro USB/MicroB download cable Carlson V6 SurvCE demo version 6, ready for your version of SurvCE, we can assist with the software transfer, or we can provide Robot, GPS, Roads, Hybrid, $1000 for SurvCE basic, $1000 for GPS, $500 for Robot, Hybrid, Roads. Note, as we have a few in stock the new carrycases may differ from the photograph. With new batteries, data transfer cable, carrycase and we can assist with Windows mobile patch for connecting to your computer. Thanks for viewing
Carlson Surveyor Field Controller Data Collector w/ SurvCE v2.53 TS & Hard Case
This Carlson Surveyor data collector is in good pre-owned condition. It comes with a battery installed, power supply, and stylus in the original hard carrying case. This collector comes with SurvCE version 2.53 installed with the TS module enabled. See pictures for more details. Please note the display show a bit of wear as show in the pictures. Ready to use. Please refer to the pictures for the condition of the item. Everything in the pictures is included. Anything not in the pictures is not included. If you have any questions just shoot me a message and I’ll get back to you within 24 hours (usually sooner!)
Carlson Torsion Spring Tester Model TT 1/2 — HEAD STOCK LOCKING HANDLE PART
Carlson Torsion Spring Tester Model TT 1/2 — HEAD STOCK LOCKING HANDLE PART ONLY Some pictures show the part attached to head stock and the base with model plate.Head stock and base not included just shown for reference.
New Mr Carlson’s Super Probe From YouTube with SS Probe Kit MK3 2 PCB DIY SMD
Mr Carlson’s Super ProbeDIY PCB Assembly Kit (Version MK3) Two SMD PCBs More Parts & SparesCNC Machined SS Probe Body Kit (Speaker, Battery & Amp Case Not Included!)As buyer feedback attests, this is an advanced skill build. As seen on YouTube and commented on on many other sites, Paul Carlson designed a very useful non-contact very high gain electronic probe for investigating just about any kind of electrical signal from audio to RF. The design is well proven and open-sourced. There are also several open-source PCB designs for the probe and amplifier, but most of them are SMD designs. This is likely the primary barrier to building a one-off implementation of this design. To address this, we used an open-source version of the PCB design by Yannick99 at www.instructables.com. These 2 PCBs are well designed and reliable, and used in many DIY probes. Anyone interested in building the probe should first review: Mr Carlson’s YouTube video @ https://www.youtube.com/watch?v=uVkJqqZroN0 Yannick99 @ https://www.instructables.com/Carlsons-Super-Probe/Web search for many other reviews and assembly hints. Here is a great UT video of Carlson using the SuperProbe to locate a noisy component inside a complex transceiver. He makes it seem so easy, and with the SuperProbe it is! https://www.youtube.com/watch?v=uiK1BD7HILo The KitThis kit includes the main PCBs, all SMD parts and most of the support parts. There are other components needed to construct a complete probe and amplifier. The kit includes all of the through-hole and SMD components to assemble the PCBs as well as the 2 pots (with knobs) used in the amplifier and a stereo 3.5mm jack & plug, power switch & power LED. It DOES NOT include an amplifier case, batteries or speaker. The Stainless Steel ProbeThis kit includes everything needed to house the probe PCB in a metal housing. SS Probe Part List The following components are used in the SS probe body. 1. Machined stainless steel telescoping probe body 2. Machined acetyl PCB carrier 3. Copper adhesive grounding tape 4. 3 #0-80 x 1/8″ PCB mounting screws 5. 1 #4-40 x 1/4″ carrier screw 6. 3″ x 50 ohm coaxial probe wire 7. Heat shrink tube to optionally insulate the metal probe The AssemblyWhile there are a few through-hole & panel mounted components, all of the remaining parts are 0805/1206 SMD parts. Soldering such components requires specific equipment, soldering tools, solder, tweezers, optics, skill and patience. Follow the included instructions in detail. Schematic details are included and are identical to the original design. Some of the listing photos show a particular amplifier implementation in a very compact package. Such compactness is not necessary, but demonstrates what can be achieved. See Our Battery Pack Option Too Check our listing for a Li-Ion battery pack & charger. eBay #166266862893https://www.ebay.com/itm/166266862893 Parts List:Please see photos for a complete parts list. ParticularsBuyers Note:eBay collects 12-25% of the final price of every transaction on this platform, so it is an expensive place to run a small business. We try to provide a good value to customers anyhow. Warranty return is 30 days, buyer pays return shipping.Flat First Class (GA) Shipping with Tracking. Ask questions before ordering.
Mr Carlson’s Super Probe 780mAh Li-Ion Battery Rechargable Power Pack Kit
Mr Carlson’s Super ProbeLi-Ion Battery Pack Kit 780mAh Protected Battery & Charger Module See our other listing for the Probe PCB Kit. This battery pack is the same used in our implementation on the Instructables site and shown in the photos. Some soldering, drilling etc necessary to fit your particular design. With this pack, you can always know the condition of your battery without opening the box! As seen on YouTube and commented on on many other sites, Paul Carlson designed a very useful non-contact very high gain electronic probe for investigating just about any kind of electrical signal from audio to RF. The design is well proven and open-sourced. There are also several open-source PCB designs for the probe and amplifier, but most of them are SMD designs. This is likely the primary barrier to building a one-off implementation of this design. Anyone interested in building the probe should first review: Mr Carlson’s YouTube video @ https://www.youtube.com/watch?v=uVkJqqZroN0 Yannick99 @ https://www.instructables.com/Carlsons-Super-Probe/Web search for many other reviews and assembly hints. The KitThis kit includes a protected 780mAh Li-Ion Battery with connector, a TP4056 1A charger module, 2 0-80 mounting screws, matching coupling connector, USB charging cable, schematic. Some of the listing photos show a particular implementation in a very compact package. Such compactness is not necessary, but demonstrates what can be achieved. ParticularsBuyers Note:eBay collects 12-25% of the final price of every transaction on this platform, so it is an expensive place to run a small business. We try to provide a good value to customers anyhow. Warranty return is 30 days, buyer pays return shipping.Flat First Class (GA) Shipping with Tracking. Ask questions before ordering.
New with More Parts Mr Carlson’s MK2 Super Probe From YouTube 2 PCB DIY SMD Kit
Mr Carlson’s Super ProbeDIY PCB Assembly Kit (Version MK2) Two SMD PCBs with More Parts & Spares (Speaker, Battery, Probe & Amp Cases Not Included!)As buyer feedback attests, this is an advanced skill build. As seen on YouTube and commented on on many other sites, Paul Carlson designed a very useful non-contact very high gain electronic probe for investigating just about any kind of electrical signal from audio to RF. The design is well proven and open-sourced. There are also several open-source PCB designs for the probe and amplifier, but most of them are SMD designs. This is likely the primary barrier to building a one-off implementation of this design. To address this, we used an open-source version of the PCB design by Yannick99 at www.instructables.com. These 2 PCBs are well designed and reliable, and used in many DIY probes. Anyone interested in building the probe should first review: Mr Carlson’s YouTube video @ https://www.youtube.com/watch?v=uVkJqqZroN0 Yannick99 @ https://www.instructables.com/Carlsons-Super-Probe/Web search for many other reviews and assembly hints. The KitThis kit includes the main PCBs, all SMD parts and most of the support parts. There are other components needed to construct a complete probe and amplifier. The kit includes all of the through-hole and SMD components to assemble the PCBs as well as the 2 pots (with knobs) used in the amplifier and a stereo 3.5mm jack & plug, power switch & power LED. It DOES NOT include cases, packaging, wire, screws, probe-tips, batteries, speaker, or anything else that might be needed to construct a complete SuperProbe. (Essentially everything within the dotted boxes on the included schematics is in the kit!) The AssemblyWhile there are a few through-hole & panel mounted components, all of the remaining parts are 0805/1206 SMD parts. Soldering such components requires specific equipment, soldering tools, solder, tweezers, optics, skill and patience. Follow the included instructions in detail. Schematic details are included and are identical to the original design. Some of the listing photos show a particular implementation in a very compact package. Such compactness is not necessary, but demonstrates what can be achieved. See Our Battery Pack Option Too Check our listing for a Li-Ion battery pack & charger. eBay #166266862893https://www.ebay.com/itm/166266862893 Parts List:Please see photos for a complete parts list. ParticularsBuyers Note:eBay collects 12-25% of the final price of every transaction on this platform, so it is an expensive place to run a small business. We try to provide a good value to customers anyhow. Warranty return is 30 days, buyer pays return shipping.Flat First Class (GA) Shipping with Tracking. Ask questions before ordering.
Agilent N4906A Serial BERT 3.6 Gb/s CFG001 12 Gb/s
Untitled DocumentAgilent N4906A Serial BERT 3.6 Gb/s or 12 Gb/s With Options:CFG001 50/60Hz. S/N: US43200111 This unit is in good working condition and comes with a 30 day warranty. We also offer a 14 day ROR. We have been in business for over 15 years, our main focus is customer satisfaction through excellent service and providing high quality test equipment. Please let us know if you have any questions or other test equipment needs.SHIPPING We offer fast domestic and international Shipping. Shipping using the customer’s fedex, ups, or dhl account is available upon request. Overseas customers please consider freight / customs charges before bidding. Lead time for most units is usually between 1-3 business days.PAYMENTSWe accept PayPal, Credit Cards, and Wire Transfers. Let us know if you have any questions regarding payments.
National Instruments NI PXIe-1085 PXIe, 18-Slot Up to 12 GB/s PXI Chassis
Specifications: National Instruments NI PXIe-1085 PXIe, 18-Slot Up to 12 GB/s PXI Chassis Condition Used Payment Payment must be received within 2 business days. Shipping We offer free shipping with USPS or UPS Ground same day if payment is received by 4 p.m. If you have another shipping preference, please contact us prior to purchase. Return Policy We provide 30-day money back guarantee on items that are damaged/broken we will refund the full item price paid. Shipping and handling fees are not refundable. Buyer will be responsible for shipping the item back. A 15% restocking fee will be applied to the return if the reason for return is due to a customer error.
12GB Wintec (3X4GB) DDR2 667MHz ECC Memory WD2FE04GX436-667G-PQ-CRO
Home About Us Feedback Contact Us Contact us for express shipping quotation Welcome to Surplus Tech Mart! We sell various surplus equipment and new equipment. You can find anything in our shop from cameras and engines, military surplus, rf equipment, test equipment, computer parts, electronic parts and more! We are an experienced eBay sellers so be assured that you will get the best service here. Our stock is always changing, so please check back often! 12GB Wintec (3X4GB) DDR2 667MHz ECC Memory WD2FE04GX436-667G-PQ-CRO Starting At: Description if you have any questions please contact us. if you have any questions please contact us. SKU – 27760 Notice: Due to the impact of the pandemic situation on Israel and all over the world,the shipping time may be will delay about 10-20 days in transit at some locations. if you want the item to be delivered fast we can ship via dhl express with reasonable price.just contact us. Returns If you are not 100% satisfied with your item simply return it to us! Guidelines for returns: # you have 14 days from the date you receive your item to return it for a refund. # Items must be in original condition. “AS-IS” items are not eligible for returns. # Refund will be for the sale price only. Shipping and handling are non-refundable. # You are responsible for return shipping costs. Items must be shipped back to us with insurance. We retain the right to refuse any refund if we feel the return policy is being abused. PLEASE NOTE:OUR SHOP IS NOT RESPONSIBLE FOR CUSTOMS OR ANY FEE. Payment We accept all major credit cards via PayPal, we can accept other forms of payment as well, if you wish to pay in other form of payment please contact us first. Israeli buyers must add 18% maam payment for the total price Shipping Surplus Tech Mart is located in Israel, We ship worldwide with Registered mail, EMS or DHL. Items are shipped within 1-3 days of payment receipt. However, most items ship within 1 business day. All items are packed professionally with bubble wrap and sturdy boxes. Please keep in mind that we are shipping your item from Israel, so shipping cost may seem a bit higher and please allow extra time for delivery. If you ever have any questions or concerns, please contact us and we’d be happy to assist you. PLEASE NOTE: OUR SHOP IS NOT RESPONSIBLE FOR CUSTOMS OR ANY FEE. Warranty New A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the listing for full details. New other (see details) A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the listing for full details and description of any imperfections. Manufacturer refurbished An item that has been professionally restored to working order by a manufacturer or manufacturer-approved vendor. This means the product has been inspected, cleaned, and repaired to meet manufacturer specifications and is in excellent condition. This item may or may not be in the original packaging. See the listing for full details. Seller refurbished An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the listing for full details. Used An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the listing for full details and description of any imperfections. For parts or not working An item that does not function as intended and is not fully operational. This includes items that are defective in ways that render them difficult to use, items that require service or repair, or items missing essential components. See the listing for full details. About Us Surplus Tech Mart specialize in Tech liquidation, you can find in our eBay store everything in the tech world from business and industrial, computer equipment and much more, we are an experienced seller in the online market and we have decided to open an eBay store to expand our clientele. Surplus Tech Mart’s main goal is to give you an unforgettable shopping experience. We do our best to take care of all the clients that purchase from us and we will never let any customer down, this is our main motto. Our team will be here to support you all the way from purchasing to the arrival of your item. We take our eBay business very seriously and any questions that you may have will be answered within 12 hours (most of the time we respond much quicker!). Contact Us We at Surplus do everything to provide full customer service, we are here for you to support any claim you may have or a problem, DO NOT IN ANY CASE open an eBay buyer protection case before trying contacting us, we will always resolve an issue and we will always make it to your satisfaction, when you open a buyer protection case without contacting us first you will limit our selling activities so should you purchase this item and you will have any issue what so ever with it CONTACT US FIRST! Send us a message Please note that our shop is not responsible for customs or any fee. If you have any customs notifications or instructions for us please note us and we will try to do our best. We sell various surplus equipment and new equipment. We are an an experienced eBay seller so be assured that you will get the best service here. Our stock is always changing, so please check back often! –> Copyright @ Surplus Techmart 2017 All Rights Reserved Powered by Codix
Keysight 70843A Error Detector System, 0.1 Gb/s to 12 Gb/s
Agilent HP Keysight 70843A Error Detector System 0.1 Gb/s to 12 Gb/s If you are not satisfied for any reason, please contact us via eBay Messaging. All Items are subject to prior sale. Shipping Information: Local pick up is available. We are happy to combine shipping, contact us before paying, and please wait for invoice to get the proper shipping charges. We will only ship to the eBay verified address. Orders are usually shipped 1-2 business days after receipt of payment, please allow 6-10 days for standard delivery. We use the eBay Global Shipping Program for international sales. We do not ship or processes orders on weekends or holidays. We will accept the Buyers Shipping Account. Tax Information: We are required to charge sales tax in the following states: Illinois, California, Maryland and Nevada. Resellers: If the item you wish to purchase is for resale, please send us a current resale certificate, before paying for the item. We will then revise the invoice, and remove the sales tax from your order. Please send us a message for each order you purchase, as there is no automatic process to remove the sales tax. Contact Information: Please contact us through the eBay message service and allow at least 1 business day for a response. Global Test Equipment 1424 Centre Circle Downers Grove, IL 60515 Business Hours Monday to Friday (8:00 AM to 5:30 PM-Central Standard Time) Closed on Holidays and Weekends Thank You