Agilent N4906A Serial BERT 3.6 Gb/s CFG001 12 Gb/s
Untitled DocumentAgilent N4906A Serial BERT 3.6 Gb/s or 12 Gb/s With Options:CFG001 50/60Hz. S/N: US43200111 This unit is in good working condition and comes with a 30 day warranty. We also offer a 14 day ROR. We have been in business for over 15 years, our main focus is customer satisfaction through excellent service and providing high quality test equipment. Please let us know if you have any questions or other test equipment needs.SHIPPING We offer fast domestic and international Shipping. Shipping using the customer’s fedex, ups, or dhl account is available upon request. Overseas customers please consider freight / customs charges before bidding. Lead time for most units is usually between 1-3 business days.PAYMENTSWe accept PayPal, Credit Cards, and Wire Transfers. Let us know if you have any questions regarding payments.
XY-PWM1 Signal Generator Module Adjustable PWM Pulse Frequency Square Wave
100% brand new and high qualityModule description:PWM output can set frequency and duty cycle respectively.Frequency is divided into four areas: automatic switching:1.XXX (without decimal point): the smallest unit is 1Hz, and the value range is 1Hz~999Hz;The minimum unit of2.X.XX (decimal point in 100 bits) is 0.01Khz, and the value range is 1.00Khz~9.99Khz;3.XX.X (decimal point in ten places): the smallest unit is 0.1Khz; and the range is 10.0KHz~99.9KHz.4.X.X.X (decimal point in ten bits and 100 bits): the smallest unit is 1Khz; and the range is 1KHz~150KHz.E.g. frequency display: 100 indicates PWM output 100Hz pulse;1.01 represents the pulse of PWM output 1.01K.54.1 represents the pulse of PWM output 54.1KHz.1.2.4 indicates the pulse of PWM output 124KHz.Duty cycle:0~100%;All settings are saved by power down.Parameter setting:Module has four independent keys, used to set the frequency and duty cycle, support short press (increase or decrease a unit) and long press (quickly increase or decrease), very simple, set the parameters automatically save, power loss is not lost.Scope of application:1.is used as a square wave signal generator to generate square wave signals for experimental development.2.is used to generate square wave signals that control motor drives.3.generate adjustable pulse for MCU use;4.generate adjustable pulses to control related circuits (PWM dimming and speed regulation applications).Specification:Working voltage: 3.3~30VFrequency range: 1Hz~150KHzFrequency accuracy: accuracy is about 2% in each rangeSignal load capability: output current can be around 5~30mAOutput amplitude: PWM amplitude is equal to supply voltageAmbient temperature: -20~+70℃Dimensions: 3.7×4.3×7.8cm/1.46×1.69×3.07inchColor: BlackQuantity: 1 PcNote: 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!Package includes:1 x XY-PWM1 Signal Generator Module
Adjustable Square Wave Generator PWM Pulse Frequency Duty Cycle Digital Module
PWM Pulse Frequency Duty Cycle Square Wave Signal Generator Adjustable Module CL
PWM Pulse Frequency Duty Cycle Square Wave Signal Generator Adjustable Module PWM Pulse Frequency Duty Cycle Square Wave Signal Generator Adjustable Module Description: PWM signal generator is a device that provides electrical signals at a variety of frequencies, square wave, and output levels. It is used as a signal source or excitation source for testing. Widely used in production practice and technology. Features: 1>.With outer casing; 2>.LCD high definition display; 3>.Support UART; 4>.Support frequency adjustment; 5>.Support duty cycle adjustment; 6>.High precision detection; 7>.Support power-down memory function; 8>.1-Channel PWM output. Parameters: 1>.Product name: PWM Signal Generator; 2>.Model: XY-PWM; 3>.Work voltage: DC 3.3V-30V; 4>.Frequency range:1Hz~150KHz; 5>.Frequency accuracy:2%; 6>.Duty cycle range:0.00%-100%; 7>.Output Current: About 5-30mA; 8>.Output amplitude: Same to input voltage; 9>.Size:79*43*27mm; 10>.Operating temperature:-20℃~70℃; Frequency set range: Enter the settings interface when short press any button ‘FREQ+’ or ‘FREQ-’ in the normal running status to select frequency range. Automatically switch frequency range. Pay attention to the position where the decimal point moves when the button is pressed. Display ‘XXX’. No decimal point, The minimum frequency is 1Hz. The frequency range is 1Hz ~ 999Hz. Display ‘X.XX’. The decimal point is the penultimate, The minimum frequency is 0.01KHz.The frequency range is 1.00KHz ~ 9.99KHz. Display ‘XX.X’. The decimal point is the third last, The minimum frequency is 0.1KHz.The frequency range is 10.0KHz ~ 99.9KHz. Display ‘X.X.X’. The decimal point is fully lit, The minimum frequency is 1KHz.The frequency range is 1KHz ~ 150KHz. For example: Display ‘100’ means PWM output frequency is 100Hz; Display ‘1.01’ means PWM output frequency is 1.01KHz; Display ‘54.1’ means PWM output frequency is 54.1KHz; Display ‘1.2.4’ means PWM output frequency is 124KHz; Duty cycle set range: Enter the settings interface when short press any button ‘DUTY+’ or ‘DUTY-’ in the normal running status to select duty cycle. Automatically switch frequency range. Duty cycle range is 0.00%-100%. Use steps: 1>.Connect to power supply; 2>.Short or long press button ‘FREQ+’ or ‘FREQ-’ to set frequency; 3>.Short or long press button ‘DUTY+’ or ‘DUTY-’ to set duty cycle; 4>.Connect to load. UART communication and parameter settings The system supports UART data upload and parameter setting functions (TTL level); UART: 9600, 8, 1 1>.Set PWM frequency: ‘F101’:Set frequency is 101Hz.‘101’ can by replace by 001~999; ‘F1.05’:Set frequency is 1.05KHz.‘1.05’ can by replace by 1.00~9.99; ‘F10.5’:Set frequency is 10.5KHz.‘10.5’ can by replace by 10.0~99.9; ‘F1.0.5’:Set frequency is 105KHz.‘1.0.5’ can by replace by 1.0.0~1.5.0; 2>.Set PWM duty cycle: ‘DXXX’: Set duty cycle is XXX. ‘XXX’ can be 000-100. E.g:‘D051’ means PWN duty cycle is be set as 51%. 3>.Read set parameter: Send ‘read’ and then get parameter. 4>.Return value: Return ‘DOWN’: Set success. Return ‘FALL’: Set fail. Application: 1>.Square wave signal generator, generating square wave signal for experimental development; 2>.Used to generate a square wave signal that controls the motor driver; 3>.Generate adjustable pulses for use by the MCU; 4>.Dimmer; 5>.Speed governor; Note: It’s 1-channel PWM output signals are the same. They can not adjust independently. Package include: 1 x PWM Signal Generator Note: Instructions/schematic are NOT included. We don’t provide technical assistance please make sure that you are familiar with the product before purchasing. About Shipping: * Goods in stock in USA, buyer can get the parcel around 3-5 business days. * We provide tracking number freely for all buyers. * Please confirm your shipping address is correct. Buyers are responsible for undeliverable order due address mismatch. We reserve the right to charge shipping fee to reship undeliverable items. * Any potential customs tax fee applied to the parcel should be covered by the buyer.
PWM Signal Generator DC 3.3V-30V 1Hz~150KHz Adjustable PWM Pulse Frequency Cycle
PWM Signal Generator DC 3.3V-30V 1Hz~150KHz Adjustable PWM Pulse Frequency Cycle PWM Signal Generator DC 3.3V-30V 1Hz~150KHz Adjustable PWM Pulse Frequency Cycle Description: PWM signal generator is a device that provides electrical signals at a variety of frequencies, square wave, and output levels. It is used as a signal source or excitation source for testing. Widely used in production practice and technology. Features: 1>.With outer casing; 2>.LCD high definition display; 3>.Support UART; 4>.Support frequency adjustment; 5>.Support duty cycle adjustment; 6>.High precision detection; 7>.Support power-down memory function; 8>.1-Channel PWM output. Parameters: 1>.Product name: PWM Signal Generator; 2>.Model: XY-PWM; 3>.Work voltage: DC 3.3V-30V; 4>.Frequency range:1Hz~150KHz; 5>.Frequency accuracy:2%; 6>.Duty cycle range:0.00%-100%; 7>.Output Current: About 5-30mA; 8>.Output amplitude: Same to input voltage; 9>.Size:79*43*27mm; 10>.Operating temperature:-20℃~70℃; Frequency set range: Enter the settings interface when short press any button ‘FREQ+’ or ‘FREQ-’ in the normal running status to select frequency range. Automatically switch frequency range. Pay attention to the position where the decimal point moves when the button is pressed. Display ‘XXX’. No decimal point, The minimum frequency is 1Hz. The frequency range is 1Hz ~ 999Hz. Display ‘X.XX’. The decimal point is the penultimate, The minimum frequency is 0.01KHz.The frequency range is 1.00KHz ~ 9.99KHz. Display ‘XX.X’. The decimal point is the third last, The minimum frequency is 0.1KHz.The frequency range is 10.0KHz ~ 99.9KHz. Display ‘X.X.X’. The decimal point is fully lit, The minimum frequency is 1KHz.The frequency range is 1KHz ~ 150KHz. For example: Display ‘100’ means PWM output frequency is 100Hz; Display ‘1.01’ means PWM output frequency is 1.01KHz; Display ‘54.1’ means PWM output frequency is 54.1KHz; Display ‘1.2.4’ means PWM output frequency is 124KHz; Duty cycle set range: Enter the settings interface when short press any button ‘DUTY+’ or ‘DUTY-’ in the normal running status to select duty cycle. Automatically switch frequency range. Duty cycle range is 0.00%-100%. Use steps: 1>.Connect to power supply; 2>.Short or long press button ‘FREQ+’ or ‘FREQ-’ to set frequency; 3>.Short or long press button ‘DUTY+’ or ‘DUTY-’ to set duty cycle; 4>.Connect to load. UART communication and parameter settings The system supports UART data upload and parameter setting functions (TTL level); UART: 9600, 8, 1 1>.Set PWM frequency: ‘F101’:Set frequency is 101Hz.‘101’ can by replace by 001~999; ‘F1.05’:Set frequency is 1.05KHz.‘1.05’ can by replace by 1.00~9.99; ‘F10.5’:Set frequency is 10.5KHz.‘10.5’ can by replace by 10.0~99.9; ‘F1.0.5’:Set frequency is 105KHz.‘1.0.5’ can by replace by 1.0.0~1.5.0; 2>.Set PWM duty cycle: ‘DXXX’: Set duty cycle is XXX. ‘XXX’ can be 000-100. E.g:‘D051’ means PWN duty cycle is be set as 51%. 3>.Read set parameter: Send ‘read’ and then get parameter. 4>.Return value: Return ‘DOWN’: Set success. Return ‘FALL’: Set fail. Application: 1>.Square wave signal generator, generating square wave signal for experimental development; 2>.Used to generate a square wave signal that controls the motor driver; 3>.Generate adjustable pulses for use by the MCU; 4>.Dimmer; 5>.Speed governor; Note: It’s 1-channel PWM output signals are the same. They can not adjust independently. Package include: 1 x PWM Signal Generator Note: Instructions/schematic are NOT included. We don’t provide technical assistance please make sure that you are familiar with the product before purchasing. About Shipping: * Goods in stock in USA, buyer can get the parcel around 3-5 business days. * We provide tracking number freely for all buyers. * Please confirm your shipping address is correct. Buyers are responsible for undeliverable order due address mismatch. We reserve the right to charge shipping fee to reship undeliverable items. * Any potential customs tax fee applied to the parcel should be covered by the buyer.
DC 5V 12V NE555 Adjustable Resistance Frequency Pulse Generator Module
Package: 1X NE555 Module Feature: 1. Onboard NE555 IC. 2. Single channel signal output, the output duty cycle about 50% square wave. 3. Plate load resistor, adjust the resistance to control the output frequency. 4. Onboard power indicator. 5. Working voltage: 5V~12V. 6. Frequency range: 2K-25KHz 7. Size: 3*1.5cm Contact Us (1) We strive to provide the best service as possible, commit to resolve all problems and give fast shipping. (2) Please contact us before giving any negative feedback. If you have any questions, please do not hesitate to contact us. Payment (1) All payments must be prepaid and cleared. (2) We only accept Paypal payment. After checkout, please make through Paypal service. Shipping (1) Buyer is responsible for any incorrect address and undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address. We take the paypal address as your shipping address. Please make sure your shipping address is correct during check out. (2) Your order will be shipped within 24 hours after payment is cleared (Sat. & Sun. excluded and holidays) (3) We ship orders using USPS (United States Postal Service). The shipment usually takes 2-4 business days, excluding holidays, Saturday and Sunday (4) Local pick up is not available. (5) No International Shipping. Warranty (1) This product has a 30-day warranty. (2) Warranty does not extended to any products that are buyer’s negligence, abuse, misuse, improper installation or physically damaged on the buyer or user’s part. (3) Please contact us before making a replacement or refund. (4) In case of returning, buyer must pay their own postage and shipping fees for replacement or refund. We will provide replacement or refund after product is received.
PWM Pulse Frequency Duty Cycle Adjustable Module Signal Generator 1Hz-150KHz DO
PWM Pulse Frequency Duty Cycle Adjustable Module Signal Generator 1Hz-150KHz PWM Pulse Frequency Duty Cycle Adjustable Module Signal Generator 1Hz-150KHz Description: PWM signal generator is a device that provides electrical signals at a variety of frequencies, square wave, and output levels. It is used as a signal source or excitation source for testing. Widely used in production practice and technology. Features: 1>.With outer casing; 2>.LCD high definition display; 3>.Support UART; 4>.Support frequency adjustment; 5>.Support duty cycle adjustment; 6>.High precision detection; 7>.Support power-down memory function; 8>.1-Channel PWM output. Parameters: 1>.Product name: PWM Signal Generator; 2>.Model: XY-PWM; 3>.Work voltage: DC 3.3V-30V; 4>.Frequency range:1Hz~150KHz; 5>.Frequency accuracy:2%; 6>.Duty cycle range:0.00%-100%; 7>.Output Current: About 5-30mA; 8>.Output amplitude: Same to input voltage; 9>.Size:79*43*27mm; 10>.Operating temperature:-20℃~70℃; Frequency set range: Enter the settings interface when short press any button ‘FREQ+’ or ‘FREQ-’ in the normal running status to select frequency range. Automatically switch frequency range. Pay attention to the position where the decimal point moves when the button is pressed. Display ‘XXX’. No decimal point, The minimum frequency is 1Hz. The frequency range is 1Hz ~ 999Hz. Display ‘X.XX’. The decimal point is the penultimate, The minimum frequency is 0.01KHz.The frequency range is 1.00KHz ~ 9.99KHz. Display ‘XX.X’. The decimal point is the third last, The minimum frequency is 0.1KHz.The frequency range is 10.0KHz ~ 99.9KHz. Display ‘X.X.X’. The decimal point is fully lit, The minimum frequency is 1KHz.The frequency range is 1KHz ~ 150KHz. For example: Display ‘100’ means PWM output frequency is 100Hz; Display ‘1.01’ means PWM output frequency is 1.01KHz; Display ‘54.1’ means PWM output frequency is 54.1KHz; Display ‘1.2.4’ means PWM output frequency is 124KHz; Duty cycle set range: Enter the settings interface when short press any button ‘DUTY+’ or ‘DUTY-’ in the normal running status to select duty cycle. Automatically switch frequency range. Duty cycle range is 0.00%-100%. Use steps: 1>.Connect to power supply; 2>.Short or long press button ‘FREQ+’ or ‘FREQ-’ to set frequency; 3>.Short or long press button ‘DUTY+’ or ‘DUTY-’ to set duty cycle; 4>.Connect to load. UART communication and parameter settings The system supports UART data upload and parameter setting functions (TTL level); UART: 9600, 8, 1 1>.Set PWM frequency: ‘F101’:Set frequency is 101Hz.‘101’ can by replace by 001~999; ‘F1.05’:Set frequency is 1.05KHz.‘1.05’ can by replace by 1.00~9.99; ‘F10.5’:Set frequency is 10.5KHz.‘10.5’ can by replace by 10.0~99.9; ‘F1.0.5’:Set frequency is 105KHz.‘1.0.5’ can by replace by 1.0.0~1.5.0; 2>.Set PWM duty cycle: ‘DXXX’: Set duty cycle is XXX. ‘XXX’ can be 000-100. E.g:‘D051’ means PWN duty cycle is be set as 51%. 3>.Read set parameter: Send ‘read’ and then get parameter. 4>.Return value: Return ‘DOWN’: Set success. Return ‘FALL’: Set fail. Application: 1>.Square wave signal generator, generating square wave signal for experimental development; 2>.Used to generate a square wave signal that controls the motor driver; 3>.Generate adjustable pulses for use by the MCU; 4>.Dimmer; 5>.Speed governor; Note: It’s 1-channel PWM output signals are the same. They can not adjust independently. Package include: 1 x PWM Signal Generator Note: Instructions/schematic are NOT included. We don’t provide technical assistance please make sure that you are familiar with the product before purchasing. About Shipping: * Goods in stock in USA, buyer can get the parcel around 3-5 business days. * We provide tracking number freely for all buyers. * Please confirm your shipping address is correct. Buyers are responsible for undeliverable order due address mismatch. We reserve the right to charge shipping fee to reship undeliverable items. * Any potential customs tax fee applied to the parcel should be covered by the buyer.
Signal Generator Module Adjustable PWM Pulse Frequency Duty Cycle Square Wave GL
Features: SKU: BU1152 Module Highlights: 1.LCD display frequency and duty cycle, very clear, PWM output can be set to the frequency and duty cycle; 2. Wide frequency range, high precision; 3. Serial communication, TTL level First, the module description PWM output, you can set the frequency, duty cycle; Frequency is divided into four ranges, automatic switching: 1. XXX (no decimal point): the smallest unit is 1Hz, the value range of 1Hz ~ 999Hz; 2. X.XX (decimal point in the hundred) the smallest unit is 0.01Khz, the range of 1.00Khz ~ 9.99Khz; 3. XX.X (decimal point in ten): the smallest unit is 0.1Khz; value range of 10.0KHz ~ 99.9KHz 4. X.X.X (decimal point in ten and hundred): the smallest unit is 1Khz; value range 1KHz ~ 150KHz frequency display: 100 indicates PWM output 100Hz pulse; 1.01 indicates PWM output 1.01K pulse; 54.1 indicates that the PWM output has a pulse of 54.1 kHz; 1.2.4 indicates that the PWM output is 124 kHz pulse; Duty cycle range: 0 ~ 100%; All set parameters, power-down automatically saved. Second, the parameter settings The module has four independent keys, used to set the frequency and duty cycle, support touch (increase or decrease a unit) and long press (fast increase or decrease), set the parameters automatically save, power down Not lost. Third, the module parameters: 1. Working voltage: 3.3 ~ 30V; 2. Frequency range: 1Hz ~ 150KHz; 3. Frequency accuracy: the accuracy in each range is about 2%; 4. Signal load capacity: the output current can be about 5 ~ 30ma; 5. Output amplitude: PWM amplitude equal to the supply voltage; 6. Ambient temperature: -20 ~ +70 ℃. Fourth, the scope of application: 1. Used as a square wave signal generator, generate square wave signal for experimental development and use; 2. Used to generate a square wave signal that controls the motor driver; 3. generate adjustable pulse for MCU use; 4. generate adjustable pulse, control the relevant circuit (PWM dimming speed and other applications). 5, serial control (single-chip TTL level communication) Communication standard: 9600 bps Data bits: 8 Stop bit: 1 Check digit: none Flow control: none 1, set the frequency of the PWM “F101”: Set the frequency to 101 HZ (001 to 999) “F1.05”: set the frequency of 1.05 KHZ (1.00 ~ 9.99) “F10.5”: Set the frequency to 10.5KHZ (10.0 ~ 99.9) “F1.0.5”: set the frequency of 105KHZ (1.0.0 ~ 1.5.0) 2, set the PWM duty cycle “DXXX”: set the PWM duty cycle to XXX; (001 ~ 100) Such as D050, set the PWM duty cycle is 50% 3, read the set parameters Send a “read” string to read the set parameters. Set successfully return: DOWN; Setup failed to return: FALL. Package Includes: 1x PWM pulse frequency duty cycle adjustable module
PWM Signal Generator Module Adjustable Pulse Frequency Duty Cycle Square Wave GL
However, it is not possible to directly drive loads such as electric lights, motors, and solenoid valves. Features: Two modes can be selected: PWM mode – frequency (continuous), duty cycle. 1 x Digital PWM Signal Generator Pulse Frequency.
2PCS LCD Signal Generator PWM Pulse Frequency Adjustable Square Wave 1Hz-150KHz
Frequency range:1Hz~150KHz;. Display ‘X.X.X’. The decimal point is fully lit, The minimum frequency is 1KHz. The frequency range is 1KHz ~ 150KHz. Display ‘XXX’. No decimal point, The minimum frequency is 1Hz.