Digital Multimeter Voltmeter AC DC Volt Meter Ohmmeter Auto Range Tester w/Light
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| DC Voltage Range | 0.9V-600V |
| Warranty | One Year Warranty |
| Size | 148*76*19mm |
| Color | Red and Black |
| Display Mode | Digital |
| Manufacturer Part Number | Does not apply |
| Number Of Counts | 5999 |
| MPN | Does Not Apply |
| California Prop 65 | YES |
| California Prop 65 Warning | California Prop 65 |
| Brand | Frentaly |
| Form Factor | handheld |
| Type | Digital Multimeter |
| AC Voltage Range | 0.9V-600V |
| Features | Auto range |
| Display | Large LCD,Digital |
| Resistance Range | 10Ω-60MΩ |
Product DescriptionFeature:1. Small size, easy to carry, and convenient to carry;2. The operation is simple and easy to understand, and it is fast to get started, especially suitable for beginners and daily household use;3. Intelligent identification of AC and DC voltages, and automatic range switching without the need for gear shifting;4. Equipped with True RMS function and 2000 count display, making measurement and reading more accurate;5. Common functions such as non-contact voltage detection, switch buzzer, resistance measurement, data storage, automatic shutdown, and low battery indicator light are complete;6. Even in dark environments, high-definition backlight displays can still be used normally. In particularly dark conditions, flashlights can be turned on for auxiliary lighting; Specification:DC voltage: 0.8-600V (range: 610V)AC voltage: 0.8~600V (range: 610V)Resistance: 600 k ΩCount: 2000 CountDisplay with gear display: YesData retention: YesBacklight: YesFlashlight: YesLow battery indicator: YesAutomatic power off: Yes Package Included:1 * Digital multimeter (excluding battery)1 Pair of Quality Needle Point Leads1 Pair of Alligator Clips 1 Pair of Shielded Alligator Clips 1 * User manual How to Use: Step 1. Please remove the rubber cover on the back of the multimeter, open the battery back cover, and put 2 AAA batteries into the battery compartment according to the polarity marks. Replace the battery cover. Step 2. Turn on the multimeter, insert the test leads according to the prompts, and enter the test after contacting both ends of the test leads for calibration. Step 3. Measure voltage, resistance or continuity. Insert the test leads into the multimeter and connect them to both ends of the object being measured. The multimeter automatically measures without user selection. Notes: If you want to use the NCV function, you do not need to use test leads. Due to light and screen differences, the color of the item may be slightly different from the picture. Please allow for slight deviations in measurements and make sure you don't mind before ordering.