Cotización

Item Tag: Headphone Jack

Nokta 1/4 Headphone Jack Adapter for Nokta Metal Detectors

1/4″ Headphone Jack Adapter for Simplex+, Legend, Gold Finder, Anfibio, Kruzer Series Metal Detectors. Use with headphones that have a Standard 1/4″ Jack Connector. This adapter is designed for use with the Kruzer Series metal detectors.

Minelab Manticore ML-105 Rubber Turn-Lock Headphone Jack & USB-C Debris Cover x2

Minelab Manticore ML-105 Rubber Turn-Lock Headphone Jack & USB-C Debris Cover x2 This rubber tpu debris cover inserts & locks in with a turn just like the headphone cord and has a debris cover for the usb-c port as well. Charging is easy without removing the headphone jack portion of the cover by simply pulling the tab to remove cover from the usb-c charging port and rotating it a bit to access it or turn it 180 degrees to remove the cover from the headphone jack port. I rarely use my headset with the cord and I kept getting debris in the large opening of the port so I designed this. If you like detecting at the beach this is essential to keep accidental sand and water out. You will receive 2 in case you loose one. Please ask if you need shipping discounts. Good luck out there!

Minelab headphone jack and USB port dust cover set of 4 ML100, ML105, ML85, ML80

Here are dust caps for the Minelab wireless headphones. Will fit the ML100, ML105, ML85 and ML80 models. This will keep dust, dirt and sand out of the headphone cable socket and USB charging port when not in use. Fits just like the headphone cable. Insert dust cap into headphone socket and turn counter clockwise ¼ turn to lock in place. USB charging port cap slips into slot that charging cable uses. You will get 4 of each dust caps.* Headphone in picture not included.

Garrett Z-Lynk Wireless System Transmitter and receiver with 1/4 headphone jack

Garrett Z-Lynk Wireless System. Transmitter and receiver with 1/4″ headphone jack connector. Use your favorite land headphone with 1/4″ plug and go wireless! All the benefits of using headphones, without being tied to your metal detector. Nearly universal; designed to work with most metal detector brands and most wired headphones. Note: Z-Lynk Wireless System requires use of headphones with a 1/4″ headphone jack (not included). Key Features Freedom—all the benefits of using headphones, without being tied to your metal detector. Lightning-fast speed—Near-zero delay (17-milliseconds) from your detector to your headphones. Six times faster than Bluetooth speed, and up to four times faster than other wireless headphone kits. Versatility—Nearly universal; designed to work with most detector brands and most wired headphones. Frequency-Hopping Technology—Creates an infinite number of channels to prevent interference with nearby headphones and wireless devices. Extended Hunting Time—Get up to 30 hours of operation per charge. Recharge the Z-Lynk modules with any micro-USB charging port—on your laptop, in your car, or with a USB power block such as a smartphone charger. Can be used on both VLF (single frequency) and pulse (multi-frequency) detectors. Additional Info: Recharge the Z-Lynk transmitter and receiver modules with the supplied cables by attaching them to a laptop, your vehicle’s USB port, or a phone charger’s USB power block. Each module has an Auto-Off function that will switch off power after 30 minutes of inactivity. Specifications Speed: 17 millisecond delay (6 times faster than Bluetooth) Operating Frequency: 2.4 GHz band frequency hopping Environmental: Water resistant; do not submerge. WR-1 (receiver): IP 52: protects against light rain. WT-1 (transmitter): IP 64: protects against heavy rain. Battery type: Rechargeable Lithium Ion Charging: Micro-USB charging port (cables included) Operating time: 30 hours per charge (approx.) Warranty: 2 years, limited parts and labor Certifications: FCC, CE, IC Operating Temperature: -20° (-4° F) to 60° C (140° F)

Contáctenos