Cotización

Item Tag: Flir

FLIR T250 Thermal Imager Autofocus Test

Due to this diversity, it is not possible. We keep our promise to provide you with the best solution within 24 hours. 165% and 260%. Due to the number and limitations of publications, we are unable to upload more inventory.

FLIR Micro-USB Thermal Imaging Camera Accessory Attachment MPN 435-0005-01-00

The FLIR Micro-USB Thermal Imaging Camera Accessory Attachment is a specialized product designed to provide thermal imaging capabilities for various applications. With its compact size and easy attachment via micro-USB, this accessory allows users to capture detailed thermal images for inspection, measurement, and diagnostic purposes. The FLIR brand ensures high-quality performance and reliable results, making it a valuable addition to cameras and imaging equipment in both industrial and business settings.

Teledyne Flir Camera FL3-FW | 120 FPS | CS-MOUNT | FL3-FW-03S1C-C

Model FL3-FW-03S1C-C All cameras have been tested and all cameras work great. They will not come with lens caps. They did have lenses on them but were removed and are being sold separately. The cameras were immediately put into packaging, protecting the sensor. Comes with a protective case from Organic Motion. See pictures From the manufacturer: Sony ICX618 CCD, 1/4″, 5.6 um Global shutter 648X488 at 120 FPS A/D Converter 12-bit Image Data Output 8, 12, 16 and 24-bit digital data Image Data Formats Y8, Y16 (all models) RGB, YUV411, YUV422, Raw8, Raw16 (color models) Partial Image Modes Pixel binning and region of interest (ROI) modes Image Processing Gamma, lookup table, hue, saturation, and sharpness Gain Automatic/Manual/One-Push Gain modes 0 dB to 24 dB Gamma 0.50 to 4.00, programmable lookup table White Balance Automatic/manual modes, programmable via software High Dynamic Range Cycle 4 gain and exposure presets Color Processing On-camera in YUV or RGB format, or on-PC in Raw format Digital Interface IEEE 1394b interface with screw locks for camera control, data, and power Transfer Rates 100, 200, 400, 800 Mbit/s GPIO 8-pin Hirose HR25 GPIO connector for power, trigger, strobe, PWM, and serial I/O, 1 opto-isolated input, 1 opto-isolated output, 2 bi-directional I/O pins External Trigger Modes IIDC Trigger Modes 0, 1, 3, 4, 5, 14, 15 Synchronization Via external trigger or software trigger Shutter Global Shutter Automatic/Manual/One-Push/Extended Shutter modes 0.03 ms to >25 seconds (extended shutter mode) Image Buffer 32 MB frame buffer Memory Channels 2 memory channels for custom camera settings Flash Memory 1 MB Dimensions 29x29x30 mm excluding lens holder and connectors (metal case) Mass 58 g (without optics or tripod mounting bracket) Power Consumption 8-30 V, <2.5 W, via GPIO or 1394b interface Camera Specification IIDC v1.32 Camera Control via FlyCapture SDK, CSRs, or third party software Camera Updates In-field firmware updates Lens Mount C-mount Temperature Operating: 0 to 45C; Storage: -30 to 60

Contáctenos