Cotización

Item Tag: Buyer

New-Open Box,BROKEN SEAL,National Instruments sbRIO-9626,Single Board Controller

New-Open Box,BROKEN SEAL,National Instruments sbRIO-9626,Single Board Controller This item is new open box This item came out of new inventory, believe to be new, but the seal is broken Item acquired from a large industrial electric vehicle testing and production environment. Guaranteed to work or your money back. Please see pictures for more details.

Agilent 16902A Touchscreen WinXP Logic Analyzer Mainframe 6-slot + 1Yr warranty

This model number is a MAINFRAME so it DOES NOT come with logic analyzer modules. This mainframe accepts a lot of powerful logic analyzer module cards that are cheaply available on eBay. Memory are the max possible setting (half-channel if applicable) in the supported module list below: Current Logic Analyzers:==================16910A (102ch), 16911A (68ch): 450Mhz state (Opt 500), 250Mhz (Option 250)16951B, 16950B: 68 ch: 677 Mhz state16760A: 34 ch, 800 Mb/s state (full), 1.5Gb/s state (half)Above memory depth option ranges from 256k to 256M) 16962A: 68ch, 2Ghz State, 8 Ghz Timing (Quarter channel), Mem Option 16M to 400M Pattern generator==============48 channels, 300Mhz16720A (16M vectors) Older Logic Analyzer: All 64 data + 4 clock/data:================================600Mhz state, 1.2Ghz state on half channel model. 16753A (2Mpts), 16754A (8Mpts), 16755A (32Mpts), 16756A (128Mpts) 16950A (Opt 256:512K, 001:2M, 004:8M, 016:32M, 032:64M, 064:128M) 200Mhz state, 400Mhz conventional timing (800Mhz max):16740A (1Mb), 16741A (4Mb), 16742A (16Mb) 400Mhz state, 800Mhz timing:16750A (4Mb), 16751A (16Mb), 16752A (32Mb)16750B (4Mb), 16751B (16Mb), 16752B (32Mb) If you reach me at HUMGAR LLC (please look it up on search engines), I might be able to source the cards you ask for with the cables AT COST, install and test it at no additional *LABOR* costs. If the cards and cables are cheap enough at the time when I source it (a $200 budget limit), I might consider having it on the house. ——————————————– Use frame individually or connect together for complex, multi-bus analysis E5861A Multiframe Cable 12.1 inch color touch screen display, 800 x 600 resolution Data views: waveform/chart, listing, packet viewer, source code, compare LAN: 10/100 BaseT (optional Gbit LAN) E5860A Gbit LAN Card View Scope integrates time-correlated logic analyzer & scope waveforms into single, waveform display View Scope —————————————————————- 1 year exchange/repair warranty (domestic shipping covered). Save a copy of the listing and invoice for post-sale service from Humgar LLC. Having the unit work for you is more important the price paid. I’ll do everything within my abilities (as an electronics hobbyist) to make sure your intended usage is well taken care of. Contact me (email on your paypal invoice) first above anything else and I’ll make sure you’ll be happy with the outcome. ————————————————————————————– Corporate / Institutional customers: I can give you 2~4 weeks right-of-inspection (ship before you pay) for under certain conditions. Introduce yourself (name, position, business) but do NOT give me your phone or email. ————————————————————————————– I’d be happy to use your Fedex/UPS account (just select “local pickup” and shoot me a message). Outside 48 contiguous states: Contact me with your location for a shipping quote (or use your shipping a/c). International buyers NOT using Global Shipping Program (GSP): the $700 is just a placeholder to cover the worst caseLock-in the purchase with “buy-it-now” first, but don’t pay yet: I’ll send you an invoice with the correct shipping cost. ————————————————————————————–

EUROTHERM 6180XIO GRAPHIC RECORDER TOUCHSCREEN (C6)

EUROTHERM 6180XIO GRAPHIC RECORDER TOUCHSCREEN PLEASE SEE PHOTOS FOR ALL OTHER RATINGS PLEASE VIEW ALL PHOTOS CAREFULLY IF AN ITEM IS NOT IN THE PHOTO DO NOT ASSUME THAT IT IS INCLUDED. IF MORE THAN 1 AVAILABLE YOU MAY NOT RECEIVE THE ITEM IN THE PICTURE. (SERIAL NUMBERS AND COSMETICS ARE NOT THE SAME) Alaska, Hawaii, Puerto Rico, American Samoa, Guam, Northern Mariana Islands, US Virgin Islands, as well as international buyers should contact us for shipping quote. International buyers as well as buyers outside of the contiguous US are not permitted to make their own shipping arrangements, sorry for any inconvenience.WE OFFER MANY SHIPPING OPTIONS, WE DO CHARGE A HANDLING FEE FOR CONTIGUOUS US BUYERS WISHING TO ARRANGE THEIR OWN SHIPPING. PLEASE CONTACT US FOR DETAILS. Shipping Price listed is based on delivery within the CONTIGUOUS US only.WE SELL A LARGE VARIETY OF INDUSTRIAL AND LABORATORY ITEMS, FACTORY ITEMS, PARTS, HOUSEHOLD, ESTATE, LAB GLASS ETC WITH NEGOTIABLE PRICES. WHILE YOU’RE HERE, PLEASE FEEL FREE TO TAKE A LOOK AT WHAT WE HAVE TO OFFER IN OUR STORE, AS IT’S BEING UPDATED EVERY MINUTE!Serious buyers only! All items must be paid for within 7 days. Any items not paid for within 7 days will be cancelled and have an unpaid item dispute filed. Once that is complete, the items will be relisted.Please be sure to look at our other items as we do combine on shipping. Thanks! Check out my other items! Be sure to add us to your favorites list!Our office is closed weekends, and most holidays, we like for our employees to be able to take time to enjoy life.RETURNS: If the mistake is ours, we will offer a replacement or refund. We will not refund otherwise. We assume the buyer knows what he is buying or needs. Many obsolete items that no longer are being made are often purchased on eBay.Please disregard the number and letter in parenthesis it is for office use.*NOTE* All drives must to be connected to power for at least 4 hours prior to operation. This allows the capacitors to charge. If this action is not taken, it can ruin the drive. The drives are in storage, and the capacitors are discharged. Buyer must do this prior to operation.

PWM Pulse Frequency Duty Cycle Square Wave Signal Generator Adjustable Module CL

PWM Pulse Frequency Duty Cycle Square Wave Signal Generator Adjustable Module PWM Pulse Frequency Duty Cycle Square Wave Signal Generator Adjustable Module Description: PWM signal generator is a device that provides electrical signals at a variety of frequencies, square wave, and output levels. It is used as a signal source or excitation source for testing. Widely used in production practice and technology. Features: 1>.With outer casing; 2>.LCD high definition display; 3>.Support UART; 4>.Support frequency adjustment; 5>.Support duty cycle adjustment; 6>.High precision detection; 7>.Support power-down memory function; 8>.1-Channel PWM output. Parameters: 1>.Product name: PWM Signal Generator; 2>.Model: XY-PWM; 3>.Work voltage: DC 3.3V-30V; 4>.Frequency range:1Hz~150KHz; 5>.Frequency accuracy:2%; 6>.Duty cycle range:0.00%-100%; 7>.Output Current: About 5-30mA; 8>.Output amplitude: Same to input voltage; 9>.Size:79*43*27mm; 10>.Operating temperature:-20℃~70℃; Frequency set range: Enter the settings interface when short press any button ‘FREQ+’ or ‘FREQ-’ in the normal running status to select frequency range. Automatically switch frequency range. Pay attention to the position where the decimal point moves when the button is pressed. Display ‘XXX’. No decimal point, The minimum frequency is 1Hz. The frequency range is 1Hz ~ 999Hz. Display ‘X.XX’. The decimal point is the penultimate, The minimum frequency is 0.01KHz.The frequency range is 1.00KHz ~ 9.99KHz. Display ‘XX.X’. The decimal point is the third last, The minimum frequency is 0.1KHz.The frequency range is 10.0KHz ~ 99.9KHz. Display ‘X.X.X’. The decimal point is fully lit, The minimum frequency is 1KHz.The frequency range is 1KHz ~ 150KHz. For example: Display ‘100’ means PWM output frequency is 100Hz; Display ‘1.01’ means PWM output frequency is 1.01KHz; Display ‘54.1’ means PWM output frequency is 54.1KHz; Display ‘1.2.4’ means PWM output frequency is 124KHz; Duty cycle set range: Enter the settings interface when short press any button ‘DUTY+’ or ‘DUTY-’ in the normal running status to select duty cycle. Automatically switch frequency range. Duty cycle range is 0.00%-100%. Use steps: 1>.Connect to power supply; 2>.Short or long press button ‘FREQ+’ or ‘FREQ-’ to set frequency; 3>.Short or long press button ‘DUTY+’ or ‘DUTY-’ to set duty cycle; 4>.Connect to load. UART communication and parameter settings The system supports UART data upload and parameter setting functions (TTL level); UART: 9600, 8, 1 1>.Set PWM frequency: ‘F101’:Set frequency is 101Hz.‘101’ can by replace by 001~999; ‘F1.05’:Set frequency is 1.05KHz.‘1.05’ can by replace by 1.00~9.99; ‘F10.5’:Set frequency is 10.5KHz.‘10.5’ can by replace by 10.0~99.9; ‘F1.0.5’:Set frequency is 105KHz.‘1.0.5’ can by replace by 1.0.0~1.5.0; 2>.Set PWM duty cycle: ‘DXXX’: Set duty cycle is XXX. ‘XXX’ can be 000-100. E.g:‘D051’ means PWN duty cycle is be set as 51%. 3>.Read set parameter: Send ‘read’ and then get parameter. 4>.Return value: Return ‘DOWN’: Set success. Return ‘FALL’: Set fail. Application: 1>.Square wave signal generator, generating square wave signal for experimental development; 2>.Used to generate a square wave signal that controls the motor driver; 3>.Generate adjustable pulses for use by the MCU; 4>.Dimmer; 5>.Speed governor; Note: It’s 1-channel PWM output signals are the same. They can not adjust independently. Package include: 1 x PWM Signal Generator Note: Instructions/schematic are NOT included. We don’t provide technical assistance please make sure that you are familiar with the product before purchasing. About Shipping: * Goods in stock in USA, buyer can get the parcel around 3-5 business days. * We provide tracking number freely for all buyers. * Please confirm your shipping address is correct. Buyers are responsible for undeliverable order due address mismatch. We reserve the right to charge shipping fee to reship undeliverable items. * Any potential customs tax fee applied to the parcel should be covered by the buyer.

PWM Signal Generator DC 3.3V-30V 1Hz~150KHz Adjustable PWM Pulse Frequency Cycle

PWM Signal Generator DC 3.3V-30V 1Hz~150KHz Adjustable PWM Pulse Frequency Cycle PWM Signal Generator DC 3.3V-30V 1Hz~150KHz Adjustable PWM Pulse Frequency Cycle Description: PWM signal generator is a device that provides electrical signals at a variety of frequencies, square wave, and output levels. It is used as a signal source or excitation source for testing. Widely used in production practice and technology. Features: 1>.With outer casing; 2>.LCD high definition display; 3>.Support UART; 4>.Support frequency adjustment; 5>.Support duty cycle adjustment; 6>.High precision detection; 7>.Support power-down memory function; 8>.1-Channel PWM output. Parameters: 1>.Product name: PWM Signal Generator; 2>.Model: XY-PWM; 3>.Work voltage: DC 3.3V-30V; 4>.Frequency range:1Hz~150KHz; 5>.Frequency accuracy:2%; 6>.Duty cycle range:0.00%-100%; 7>.Output Current: About 5-30mA; 8>.Output amplitude: Same to input voltage; 9>.Size:79*43*27mm; 10>.Operating temperature:-20℃~70℃; Frequency set range: Enter the settings interface when short press any button ‘FREQ+’ or ‘FREQ-’ in the normal running status to select frequency range. Automatically switch frequency range. Pay attention to the position where the decimal point moves when the button is pressed. Display ‘XXX’. No decimal point, The minimum frequency is 1Hz. The frequency range is 1Hz ~ 999Hz. Display ‘X.XX’. The decimal point is the penultimate, The minimum frequency is 0.01KHz.The frequency range is 1.00KHz ~ 9.99KHz. Display ‘XX.X’. The decimal point is the third last, The minimum frequency is 0.1KHz.The frequency range is 10.0KHz ~ 99.9KHz. Display ‘X.X.X’. The decimal point is fully lit, The minimum frequency is 1KHz.The frequency range is 1KHz ~ 150KHz. For example: Display ‘100’ means PWM output frequency is 100Hz; Display ‘1.01’ means PWM output frequency is 1.01KHz; Display ‘54.1’ means PWM output frequency is 54.1KHz; Display ‘1.2.4’ means PWM output frequency is 124KHz; Duty cycle set range: Enter the settings interface when short press any button ‘DUTY+’ or ‘DUTY-’ in the normal running status to select duty cycle. Automatically switch frequency range. Duty cycle range is 0.00%-100%. Use steps: 1>.Connect to power supply; 2>.Short or long press button ‘FREQ+’ or ‘FREQ-’ to set frequency; 3>.Short or long press button ‘DUTY+’ or ‘DUTY-’ to set duty cycle; 4>.Connect to load. UART communication and parameter settings The system supports UART data upload and parameter setting functions (TTL level); UART: 9600, 8, 1 1>.Set PWM frequency: ‘F101’:Set frequency is 101Hz.‘101’ can by replace by 001~999; ‘F1.05’:Set frequency is 1.05KHz.‘1.05’ can by replace by 1.00~9.99; ‘F10.5’:Set frequency is 10.5KHz.‘10.5’ can by replace by 10.0~99.9; ‘F1.0.5’:Set frequency is 105KHz.‘1.0.5’ can by replace by 1.0.0~1.5.0; 2>.Set PWM duty cycle: ‘DXXX’: Set duty cycle is XXX. ‘XXX’ can be 000-100. E.g:‘D051’ means PWN duty cycle is be set as 51%. 3>.Read set parameter: Send ‘read’ and then get parameter. 4>.Return value: Return ‘DOWN’: Set success. Return ‘FALL’: Set fail. Application: 1>.Square wave signal generator, generating square wave signal for experimental development; 2>.Used to generate a square wave signal that controls the motor driver; 3>.Generate adjustable pulses for use by the MCU; 4>.Dimmer; 5>.Speed governor; Note: It’s 1-channel PWM output signals are the same. They can not adjust independently. Package include: 1 x PWM Signal Generator Note: Instructions/schematic are NOT included. We don’t provide technical assistance please make sure that you are familiar with the product before purchasing. About Shipping: * Goods in stock in USA, buyer can get the parcel around 3-5 business days. * We provide tracking number freely for all buyers. * Please confirm your shipping address is correct. Buyers are responsible for undeliverable order due address mismatch. We reserve the right to charge shipping fee to reship undeliverable items. * Any potential customs tax fee applied to the parcel should be covered by the buyer.

DC 5V 12V NE555 Adjustable Resistance Frequency Pulse Generator Module

Package: 1X NE555 Module Feature: 1. Onboard NE555 IC. 2. Single channel signal output, the output duty cycle about 50% square wave. 3. Plate load resistor, adjust the resistance to control the output frequency. 4. Onboard power indicator. 5. Working voltage: 5V~12V. 6. ​Frequency range: 2K-25KHz 7. Size: 3*1.5cm Contact Us (1) We strive to provide the best service as possible, commit to resolve all problems and give fast shipping. (2) Please contact us before giving any negative feedback. If you have any questions, please do not hesitate to contact us. Payment (1) All payments must be prepaid and cleared. (2) We only accept Paypal payment. After checkout, please make through Paypal service. Shipping (1) Buyer is responsible for any incorrect address and undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address. We take the paypal address as your shipping address. Please make sure your shipping address is correct during check out. (2) Your order will be shipped within 24 hours after payment is cleared (Sat. & Sun. excluded and holidays) (3) We ship orders using USPS (United States Postal Service). The shipment usually takes 2-4 business days, excluding holidays, Saturday and Sunday (4) Local pick up is not available. (5) No International Shipping. Warranty (1) This product has a 30-day warranty. (2) Warranty does not extended to any products that are buyer’s negligence, abuse, misuse, improper installation or physically damaged on the buyer or user’s part. (3) Please contact us before making a replacement or refund. (4) In case of returning, buyer must pay their own postage and shipping fees for replacement or refund. We will provide replacement or refund after product is received.

PWM Pulse Frequency Duty Cycle Adjustable Module Signal Generator 1Hz-150KHz DO

PWM Pulse Frequency Duty Cycle Adjustable Module Signal Generator 1Hz-150KHz PWM Pulse Frequency Duty Cycle Adjustable Module Signal Generator 1Hz-150KHz Description: PWM signal generator is a device that provides electrical signals at a variety of frequencies, square wave, and output levels. It is used as a signal source or excitation source for testing. Widely used in production practice and technology. Features: 1>.With outer casing; 2>.LCD high definition display; 3>.Support UART; 4>.Support frequency adjustment; 5>.Support duty cycle adjustment; 6>.High precision detection; 7>.Support power-down memory function; 8>.1-Channel PWM output. Parameters: 1>.Product name: PWM Signal Generator; 2>.Model: XY-PWM; 3>.Work voltage: DC 3.3V-30V; 4>.Frequency range:1Hz~150KHz; 5>.Frequency accuracy:2%; 6>.Duty cycle range:0.00%-100%; 7>.Output Current: About 5-30mA; 8>.Output amplitude: Same to input voltage; 9>.Size:79*43*27mm; 10>.Operating temperature:-20℃~70℃; Frequency set range: Enter the settings interface when short press any button ‘FREQ+’ or ‘FREQ-’ in the normal running status to select frequency range. Automatically switch frequency range. Pay attention to the position where the decimal point moves when the button is pressed. Display ‘XXX’. No decimal point, The minimum frequency is 1Hz. The frequency range is 1Hz ~ 999Hz. Display ‘X.XX’. The decimal point is the penultimate, The minimum frequency is 0.01KHz.The frequency range is 1.00KHz ~ 9.99KHz. Display ‘XX.X’. The decimal point is the third last, The minimum frequency is 0.1KHz.The frequency range is 10.0KHz ~ 99.9KHz. Display ‘X.X.X’. The decimal point is fully lit, The minimum frequency is 1KHz.The frequency range is 1KHz ~ 150KHz. For example: Display ‘100’ means PWM output frequency is 100Hz; Display ‘1.01’ means PWM output frequency is 1.01KHz; Display ‘54.1’ means PWM output frequency is 54.1KHz; Display ‘1.2.4’ means PWM output frequency is 124KHz; Duty cycle set range: Enter the settings interface when short press any button ‘DUTY+’ or ‘DUTY-’ in the normal running status to select duty cycle. Automatically switch frequency range. Duty cycle range is 0.00%-100%. Use steps: 1>.Connect to power supply; 2>.Short or long press button ‘FREQ+’ or ‘FREQ-’ to set frequency; 3>.Short or long press button ‘DUTY+’ or ‘DUTY-’ to set duty cycle; 4>.Connect to load. UART communication and parameter settings The system supports UART data upload and parameter setting functions (TTL level); UART: 9600, 8, 1 1>.Set PWM frequency: ‘F101’:Set frequency is 101Hz.‘101’ can by replace by 001~999; ‘F1.05’:Set frequency is 1.05KHz.‘1.05’ can by replace by 1.00~9.99; ‘F10.5’:Set frequency is 10.5KHz.‘10.5’ can by replace by 10.0~99.9; ‘F1.0.5’:Set frequency is 105KHz.‘1.0.5’ can by replace by 1.0.0~1.5.0; 2>.Set PWM duty cycle: ‘DXXX’: Set duty cycle is XXX. ‘XXX’ can be 000-100. E.g:‘D051’ means PWN duty cycle is be set as 51%. 3>.Read set parameter: Send ‘read’ and then get parameter. 4>.Return value: Return ‘DOWN’: Set success. Return ‘FALL’: Set fail. Application: 1>.Square wave signal generator, generating square wave signal for experimental development; 2>.Used to generate a square wave signal that controls the motor driver; 3>.Generate adjustable pulses for use by the MCU; 4>.Dimmer; 5>.Speed governor; Note: It’s 1-channel PWM output signals are the same. They can not adjust independently. Package include: 1 x PWM Signal Generator Note: Instructions/schematic are NOT included. We don’t provide technical assistance please make sure that you are familiar with the product before purchasing. About Shipping: * Goods in stock in USA, buyer can get the parcel around 3-5 business days. * We provide tracking number freely for all buyers. * Please confirm your shipping address is correct. Buyers are responsible for undeliverable order due address mismatch. We reserve the right to charge shipping fee to reship undeliverable items. * Any potential customs tax fee applied to the parcel should be covered by the buyer.

Contáctenos