Digital Multimeter Voltmeter XL830L AC DC Ammeter Ohmmeter Volt Meter Tester Ohm

Free & Fast Shipping from Real US Warehouse Featured Item Description – Type: Digital LCD Multimeter Voltmeter Ohmmeter Ammeter – 100% brand new and high quality – Product size: 17.5cm x 10.7cm x 7.5cm – AC Voltage Range:: 200/600V – Input Protection Features: HRC Fuse, Shunt Resistor – DC Voltage Range:: 200mV/2/20/200/600VFeatures: Auto Power Off, Auto-Ranging, Backlight, Battery Door Access, Data – Resistance:: 200/2k/20k/200k/2MO – Model: DM850 – Diode & Audible Continuity:: Diode testing 2.4V,1.5mA; Buzzer Sounds<30±20O SPECIAL FEATURES – Low Battery Indication – Data Hold – 3 Digit LCD MAX 1999 – Test/Measurement Functions: AC Current, AC Voltage, Capacitance, Continuity Test, DC Current, DC Voltage, Diode Test, Duty Cycle – Dynatron: Yes – Continuity Buzzer – Sample Rate: 3times/S – Low Battery Indication – Accuracy: ±a% of reading: ± N0 digits. – Working temperature : 23?±2?. – Relative Humidity: <75% Product Details – FRONT PANEL DESCRIPTION 1. FUNCTION AND RANGE SWITCH This switch is used to select the function ano desired range as well as to turn on the instrument.To extend the life of this battery, the switch should be in the "OFF" position when the nstrument is not in use. 2. DISPLAY 3? digit, 7 segment, 0.5" high LCD. 3. "Common" JACK Plug in connector for black (negative) test lead 4. "VQmA" JACK Plug in connector for red (Positive) test lead for all voltage and resistance and current (except 10A) measurements. 5. "10A JACK Plug in connector to red (positive) test lead for 10A measurement. Note: – Please do not change the inner circuit to aviod damaging the ammeter – Do not connect it to the voltage over 1000VDC or 750VAC – Make sure not connect the error measure range – Please do not use the ammeter if the back cover is wrong – Please remove the pen and cut off the power before replacing battery and fuze – Do not directly plug into the socket to measure the current otherwise, the meter will be damaged – Please read the instructions for specific measurement methods Included in this package – 1 x Digital Multimeter – 1 x Quality Probe Lead – 1 x Pakko 9V Battery Shipping & Payment Payment – We require Paypal payment only. – Your order will be cancelled if the payment is not received in one week. We offer Fast US Shipping / Not Ecomomy / Never China – There is a big difference between US Shipping and shipment made from foreign countries – There are some sellers who place orders from China after receiving US orders – If you order your urgent part from these sellers, you would have to wait a month to get it – Our orders are shipped daily from Georgia USA warehouse – Free Tracking number is provided for this item – Many years of experience to provide the fastest deliver solution for our valued customers – Please place an order with us. You will be pleasantly surprised by our service Shipping – Delivery area: We are only shipping within 48 continental United States. – Delivery method: USPS Priority & USPS First Class. Choose Priority for fast delivery. – Handling time: 1 business day after receiving payment. If USPS is open, we are open too. – Not all our items are shipped with the tracking number. – Buyers are responsible to provide us with the correct address. Please confirm your address. Handling And Return – We accept return within 14 days after delivery. – Defective items will be exchanged or fully refunded on buyers request. – 15% restocking fee will be charged on non defective items. – All items need to be returned in original package with all the supplies. – Shipping and handling fees are non-refundable under any circumstances. – Our goal is 100% customer satisfaction. – Got a problem? No Problem. Contact us by eBay message system. – We will reply promptly during business hours. Customer Support – Please do not open a case or leave us a bad feedback. This can only delay our service. – Mon~Fri: 9AM to 5PM | Sa:t 9AM to 12PM | Sun: Closed (Eastern Standard Time) – If you are happy with your purchase, please leave us a 5 star feedback. Thank you. Copyright 2018 Designed and Maintained by Ameribox an eBay Store

BRAND NEW Fluke 27 Rugged Digital Handheld Multimeter 3200-count

Fluke Model 27 Multimeter Fluke Model 27 Multimeter, BRAND NEW, in original Fluke C100 case, in original packaging. Include a pair of Fluke TL75 test lead set, a pair of Fluke AC175 alligator clips, users manual, service manual. New 9V battery will be installed before shipping. US military version, multiple unit available. Unit will be double-box packed. For international sale, we can arrange most economical shipping method at buyer’s preference, please ask. 14 days Right-of-Return.Thanks for looking!Fluke 27Extra Rugged Analog/Digital Multimeter3200-count digital display for accuracy and resolution31-segment analog bar graph for fast peaking, nulling zero adjustments and capacitor checking.Fast Auto and Manual RangingTouchHold® function captures and locks the measurement and automatically updates with the next measurementConductance for high resistance measurementMin/Max and Relative ModesConforms to IEC 1010-1 CAT IIIMeets Military Shock, Vibration and Water-Proof RequirementsAC & DC VoltageDiode TestFast Continuity BeeperSuperior EMI ShieldingOperates from -15ºC to 55ºC (5ºF to 131ºF) and 95% Relative HumidityRugged, O-Ring Sealed CaseBuilt-in Tilt-Bail Hanger Extremely Rugged, Water Resistant, O-Ring Sealed for Harsh Environments The Fluke 27 combines accurate digital and analog measurement capability with extreme ruggedness and durability. They have cases twice as thick as any other DMM we build. They are totally sealed, waterproof to 3 feet (one meter) of water for one hour, tough enough to withstand contaminants, chemicals, accidental drops and severe electrical overloads. Designed to meet military specification of MIL-STD-28800 for Style A, Class 2 instruments, the Fluke 27 performs under the extremes of heat, cold, humidity, shock, electromagnetic interference, vibration and downright abuse.

ASG Jergens ASG25 25in-lb 28.25 DN.m 1/4″ DIGITAL TORQUE TESTER ASG 25 USA!!

ASG Jergens ASG25 25in-lb 28.25 DN.m 1/4″ DIGITAL TORQUE TESTER ASG 25 USA!! *********************************************** FREE SHIPPING!! ********************************************* NO POWER SUPPLY INCLUDED. Used but in Very Good operational and physical condition. See pictures for actual condition. This is used but in great shape. One of the calibration stickers was torn, you will notice that when handling your finger will go over the sticker and since its a fairly large sized hole it will (unintentionally) tear the sticker, it wasn’t torn to make adjustments (the red paint on the calibration screws is still intact). This was tested and performs as it should. If there is a battery in it (we believe there is) then it should be replaced as it is most likely aged and in poor condition. This unit does NOT come with a power supply. We powered this up for pictures and testing and it worked great. ASG is one of the best (and most expensive) torque tester instrument manufactures out there, made in USA! This is older but a very nice unit. We do not have the manual for this unit but it appears it can be used for power tools and manual torque wrenches. It will give a peak reading and track and it zeros out just fine with additional movement left on the potentimeter. If you have any questions please do not hesitate to ask. Thanks for looking!!

Digital Tester Fluke 101 Basic Pocket Digital Multimeter English New FREE TRACK

Product Name: Fluke 101 Multimeter Introduction: Designed for basic electrical testing, the Fluke 101 digital multimeter provides reliable measurements for residential and commercial electricians, heating engineers and air conditioning technicians. This small weight a multimeter fits comfortably in your hand, but it will be more durable to withstand everyday use in the future.The Fluck 101 digital multimeter is optimal for professional multimeters. Features:Basic dc accuracy 0.5%CAT III 600 V safety ratedDiode and continuity test with buzzerSmall lightweight design for one-handed useRugged, durable designAutomatic shutdownBattery is easy to replace General Specification:Vac Range : 600.0VVdc Range: 600.0VOhms Range: 40 M OhmsCapacitor: 100.0uFFrequency:100.0kHzAuto shutoff capabilitySize: 130 mm x 65mm x 27mmWeight:160gBattery: Two AAA (Not included) We accept paypal only. All items will be shipped from korea, south. shipping time usually takes 14-28 days(Russia,South america 25~50 days) – Economy shipping : No tracking number – Standard shipping : Tracking number provide – Expedited shipping(ems): Tracking number provide, 3-7 days to arrive. You can return your product up to 14 days from the day you received it. Please include the original receipt in your return package or add a note with your eBay username. All items must be returned in original condition. Buyers are responsible for return shipping charges. if you have any questions, feel free to contact us. We usually send response within 24 hours.

2M Carbon Fiber GPS Pole with Three Positions & Carrying Case

2 Meter Two Section Carbon Fiber GPS Pole This 2 meter carbon fiber GPS pole features 3 fixed positions (1.6m/5.25ft, 1.8m/5.9ft, 2m/6.56ft) with double snap locks and a compression twist lock for other heights. Fully adjustable level vial (20 minute), replaceable stainless steel point and nylon carrying case are also included. Lightweight at 1.9 pounds and resisted impacts that would dent metal rods. Zero thermal expansion. Fits 5/8 x 11 thread prisms and GPS receivers. Use this rod with confidence for all RTK rover applications.

Dickson C441 Chart (Pack OF 60) -20 To 120F

This Dickson C441 Chart (Pack OF 60) is perfect for recording and analyzing temperature data. The chart size is 8 inches in diameter and has a range of 0 to 1000 degrees Fahrenheit. It is a circular paper chart that is suitable for both professional and industrial use.

Nanohmics Analog &Digital COMS Boards 32-Channel APD Array, Avalanche Photodiode

Nanohmics Analog and Digital COMS Boards 32-Channel APD Array For sale- a Pair of Nanohmics Analog and Digital COMS Boards as pictured, a 32-Channel APD Array. Poking around on the internet I believe APD stands for Avalanche Photodiode. These were in what I would assume was a prototype laser detector system produced for NASA, as there were no identifying marks or logos on the hard case the system was housed in. The boards are dated 2008, so I would guess they were cutting edge at the time. Nanohmics would appear to still be in the imaging business these days, but whether the boards can be redeployed I leave for you to determine. The sale includes an unmarked 1KV high voltage power supply that was connected to it. When I say unmarked the PS has a small 12 VDC power supply attached that powers the HV PS, that might potentially be covering a logo or model number but I don’t see it being worth trying to pry the two apart. Also includes the connectors and leads that went to the same brand of small power supplies only 5VDC. Unfortunately I can’t give you any guidance on how to connect those wires as there was not much room in the case to get a look at things until I had it all stripped out. All items are sold as is with no warranty offered unless one is specifically stated. However, IF you pay the Buy It Now price and find a problem that you cannot live with within 14 days of receipt you may return it for a refund of the purchase price. Accepted Best Offers are strictly as is sale and no returns will be accepted. Any testing done will be explicitly stated in the listing and any accessory items will also be mentioned or pictured. If it isn’t pictured or mentioned you can assume it is not part of the sale. The NASA facility this came from was doing a lot of research on LIDAR and there were other LIDAR related pieces in the same lot, but I can’t say with any degree of certaintuy that that is what the system this was taken from was all about. The gold connector on the sparsely populated digital board provided the trigger signal (I think) to a Laser Components Canada diode laser operating at 905nm, being offered separately. The ribbon connector went to an RLC XSCALE MINI embedded controller/SBC, also being sold separately. Please check out my other listings for those and more interesting laser and optical equipment. Check back often! Please add a $13.99 flat rate for shipping anywhere in the continental US (which does NOT include Alaska, Hawaii, Puerto Rico, Guam or APO/FPO addresses). I will ship via the carrier and level of service of my choice unless we specifically decide on a favored carrier option. I will, at my option, ship worldwide via USPS for the actual cost as determined by USPS.com.

5 Sets of Unbranded Digital Multimeter Test Leads – Brand New!

5 Sets of Multimeter Test Leads. These brand new multimeter test leads are compatible with any digital multimeter that has a standard input jack. The leads are made of PVC insulation and have a 36 inch lead length with 4mm shrouded banana plugs for easy and secure connection to your multimeter. The test ends are pin tips and have a voltage rating of 1000V and a current rating of 5A. These leads are perfect for use in the field or in the lab for a variety of test and measurement applications. Price is for 5 sets of test leads with free shipping. No international sales or shipping.